With Transition Networks' Full-Featured 100BASE-TX to100BASE-FX Media Converter,
cost-effective integration of twisted
pair and fiber optics in Fast Ethernet
networks
is easier than ever before.
|
|
|
| 性 质 : |
- Operates under heavy traffic loads without
excess heat so there
is no need for a
failure-prone internal fan.
|
- Round trip delay of only 33 bit
times - far below the Class II
rating of 92 bit
times.
|
|
|
- Automatically detects and reports
loss of link on a connection
using Link Pass Through. This feature allows the equipment at
the
remote end of a link failure to "see" this failure and
respond with
corrective actions, such as Spanning Tree
fail-over links, proprietary trunking links,
or failure
reports through SNMP or RMON procedures built into the switch,
router or hub.
|
- Automatically detects faults in a
link using Remote Fault
Detection. This feature allows you to troubleshoot a fault,
even
if it is only in one
direction, via a pulse to the link
signal on the
transmit side of the same
connection; alerting
the remote device on the same
side as the failure.
|
- User-selectable option to select half- or
full-duplex modes.
Because 100BASE-FX does not allow for auto-negotiation between
half
or full-duplex modes, the ability to select this manually
is critical;
ensuring proper use of CSMA/CD Media Access
Control.
|
| 应 用: |
Extend Network
Distance in Full-Duplex Networks Used in
pairs, this
media converter can extend
distances between two twisted pair switches or
a switch and a server up to 2,000 meters over
multimode fiber, or up to 80,000 meters over
single
mode fiber. |
|
Connect Remote Devices Using one media
converter, a switch with a
copper port can
be connected to a switch with an existing
fiber
interface.
|
|
|
|
