With Transition Networks' Full-Featured
100BASE-TX to 100BASE-FX Media Converter,
cost-effective integration of twisted pair
and fiber optics in Fast Ethernet networks
is easier than ever before.
|
|
|
| 性 质 : |
- Operates under heavy traffic loads without
excess heat so there is no need for
a
failure-prone internal fan.
|
- Round trip delay of only 33 bit
times - far below the Class II rating of 92
bit
times.
|
|
|
- Automatically detects and reports
loss of link on a connection using Link Pass
Through. This feature allows the equipment at the
remote end of a link failure
to "see" this failure and respond with
corrective actions, such as Spanning
Tree fail-over links, proprietary trunking links,
or failure reports through
SNMP or RMON procedures built into the switch,
router or hub.
|
- Automatically detects faults in a
link using Remote Fault Detection. This
feature allows you to troubleshoot a fault, even
if it is only in one
direction, via a pulse to the link signal on the
transmit side of the same
connection; alerting the remote device on the same
side as the failure.
|
- User-selectable option to select half- or
full-duplex modes. Because
100BASE-FX does not allow for auto-negotiation between half
or full-duplex
modes, the ability to select this manually is critical;
ensuring proper use
of CSMA/CD Media Access Control.
|
| 应 用: |
|
Extend Network
Distance in Full-Duplex Networks Used in
pairs, this media converter
can extend
distances between two twisted pair switches or
a switch and a server up
to 2,000 meters over
multimode fiber, or up to 80,000 meters over
single mode
fiber.
|
Connect Remote Devices Using one media
converter, a switch with a copper port can
be
connected to a switch with an existing
fiber interface.
|
|
|
|
